Pengaruh Dip Time Pada Unit Processor Terhadap Linearisasi Plate Cetak
DOI:
https://doi.org/10.32722/pt.v19i2.2499Keywords:
Quality, Plate CtP, Dip TimeAbstract
This study aims to analyze the effect of the parameters on the processing unit on the quality of the printing plate. The parameters used in this study use the immersion time method. This research activity also aims to be able to know the real picture of the effect of changes in immersion time on the quality of the printed plate. Expected results of research on the effect of immersion time on the quality of printing plates, namely the extent to which immersion time affects the quality of Computer to Plate (CtP) plates to be printed on offset printing machines. Next, the researchers will also formulate problems that arise due to the development of plaques and provide solutions. This research should be a reference for users involved in improving print quality. For the printing industry can be used as a material consideration in the process of manufacturing quality printing plates for the good of the printing industry which is good at global competition.
Downloads
References
Dameria, Ane. 2008. Basic printing. Link & Match Graphics, 2008
Kotaro Kudo,Watanabe noriaki,Sonokawa Koji,Tomoyoshi Mitsumoto, Kyosuke Tsumura,Tadao Shibamoto ,Taira Murakami, 2017, Development of Processless CTP Plates with High Printing Durability and Adaptability to UV Ink Printing, Fujifilm Reseaarch Development no, 62-2017.
Kiphan, Helmut, 2011. Handbook of Printer Media, Germany, Heidelberg,
Speirs, hugh, 2009. Introduction to prepress 2nd edition, Pira International,
Miljković, P., Valdec, D., & Matijević, M. (2018). The impact of printing substrate on dot deformation in flexography. Tehnicki Vjesnik, 25, 509–515. https://doi.org/10.17559/TV-20170710152140
Tomašegovic, T., Beynon, D., Claypole, T., & Poljacek, S. M. (2017). Modifying the qualitative properties of print by surface treatment of flexographic printing plate. Journal of Print and Media Technology Research, 6(2), 57–68. https://doi.org/10.14622/JPMTR-1704
Baral, Anjan Kumar; Tanan, Nupur; Gupta, Chetna. 2016 Study of Solid Ink Density, Dot Gain and Print Contrast on Various Grades of Paper Print on Dry Toner Based Digital Press, International Journal of Science, Engineering and Computer Technology; Hisar Vol. 6, Iss. 3, (Sep 2016)
Sharma, Deepak Kumar; Rani, Ruby, 2016. Analysis of the Relationship between Solid Ink Density, Dot Gain and Print Contrast in Digital Printing. International Journal of Science, Engineering and Computer Technology,Hisar Vol. 6, Iss. 2, (June 2016): 130-131.
Downloads
Additional Files
Published
How to Cite
Issue
Section
License
Copyright (c) 2020 Jurnal Poli-Teknologi
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.