Rancang Bangun Sistem Mekanik 3D Printer Mortar 1x1x1 m

Authors

  • Muhammad Tomy Adam Politeknik Negeri Jakarta
  • Sonki Prasetya Politeknik Negeri Jakarta
  • Djoko Nursanto PT Solusi Bangun Indonesia
  • Ahmad Suhandi PT Solusi Bangun Indonesia

DOI:

https://doi.org/10.32722/jmt.v3i1.4547

Abstract

3Dmortar printer is a combination of digital automation technology with cement mortar material technology. The problem that appears in 3Dmortar printer technology requires high financial investment, because this is in the process of development especially in Indonesian, this is to build a 3Dmortar printer machine with a focus on mechanical systems that can function optimally. Design of a 3Dprinter machine with a scale of 1x1x1m was successfully made with the Certasian type which has XYZ axes and has a machine weight of 84kg, can be travel speeds above 25mm/s, the frame used is steel with 40mm and 65mm right angle  profiles. The supporting such as an extruder feeder as the regulator of mortar output is a 25mm of diameter nozzle with a 40mm of diameter screw thrust system. Mortar pump as a mortar supplier to an extruder with a hopper capacity of 30kg mortar mix with a 40mm of diameter screw drives the system at 68rpm, output can be obtained at the speed 1070gr/minute

References

A. D. Al Hafidz, T. Wijatmaka, and D. Nursanto, Seminar Nasional Teknik Mesin 2021, 2019, vol. 9, no. 1, pp. 1345-1353.

A. Asmi and J. C. J. P. S. Pratama, "Identifikasi Faktor-Faktor Keterlambatan Dalam Proyek Konstruksi di Jakarta," 2016.

J. G. Sanjayan, A. Nazari, and B. Nematollahi, 3D concrete printing technology: construction and building applications. Butterworth-Heinemann, 2019.

S. Prasetya, H. M. Ridlwan, M. Muslimin, S. Mulyono, and I. J. J. P.-T. Assagaf, "KONTROL SUHU MESIN VACUUM FORMING OTOMATIS ANEKA BENTUK KEMASAN DENGAN HMI," vol. 17, no. 3, 2018.

L. Anell, "Concrete 3d printer," 2015.

B. Nematollahi, M. Xia, and J. Sanjayan, "Current progress of 3D concrete printing technologies," in ISARC. Proceedings of the International Symposium on Automation and Robotics in Construction, 2017, vol. 34: IAARC Publications.

A. Shatornaya, M. Chislova, M. Drozdetskaya, and I. J. S. s. U. n. Z. i. S. Ptuhina, "Efficiency of 3D printers in Civil Engineering," no. 9, pp. 22-30, 2017.

P. Kurowski, Engineering Analysis with SolidWorks Simulation 2013. SDC publications, 2013.

M. Stevens and J. Covas, Extruder principles and operation. Springer Science & Business Media, 2012.

R. Khurmi and J. Gupta, A textbook of machine design. S. Chand publishing, 2005.

Downloads

Published

2022-04-29

How to Cite

Adam, M. . T., Prasetya, S., Nursanto, D., & Suhandi, A. (2022). Rancang Bangun Sistem Mekanik 3D Printer Mortar 1x1x1 m. Jurnal Mekanik Terapan, 3(1), 34–43. https://doi.org/10.32722/jmt.v3i1.4547

Issue

Vol. 3 No. 1 (2022): April 2022

Section

Articles

License

Copyright (c) 2022 Tomy, Sonki Prasetya, Djoko Nursanto, Ahmad Suhandi

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Jurnal ini berlisensi Atribut Berbagi Serupa 4.0 Internasional  (CC BY-SA 4.0)

Anda diperbolehkan:

  • Adaptasi — menggubah, mengubah, dan membuat turunan dari materi ini untuk kepentingan apapun, termasuk kepentingan komersial.

Berdasarkan ketentuan berikut:

  • Atribusi — Anda harus mencantumkan nama yang sesuai, mencantumkan tautan terhadap lisensi, dan menyatakan bahwa telah ada perubahan yang dilakukan. Anda dapat melakukan hal ini dengan cara yang sesuai, namun tidak mengisyaratkan bahwa pemberi lisensi mendukung Anda atau penggunaan Anda.

  • BerbagiSerupa — Apabila Anda menggubah, mengubah, atau membuat turunan dari materi ini, Anda harus menyebarluaskan kontribusi Anda di bawah lisensi yang sama dengan materi asli.

  • Tidak ada pembatasan tambahan — Anda tidak dapat menggunakan ketentuan hukum atau sarana kontrol teknologi yang secara hukum membatasi orang lain untuk melakukan hal-hal yang diizinkan lisensi ini.