Modifikasi Sistem Penggerak Belt Conveyor T92-BC1
DOI:
https://doi.org/10.32722/jmt.v4i1.5791Keywords:
FABA, belt conveyor, sistem penggerak, modifikasiAbstract
Belt conveyor is one of the transportation media used to move material in the form of units or bulk spills from one operating system to another. At PT Solusi Bangun Indonesia, one of the belt conveyor is used to alternately transport two types of materials, namely fly ash & bottom ash (FABA) and silica. It causes inconsistent bin filling when the consumption of silica and FABA materials is high at the same time. In addition, problems with the FABA belt conveyor drive system often occur, such as tripping motors, broken chains, and worn sprockets, causing FABA transport to be disrupted. Therefore, it is necessary to modify the belt conveyor drive system so that FABA transport becomes smoother. The methode begins with collecting data in the field or information from supervisors, field studies, carrying out the design process to evaluating the results. The modifications made were by replacing the gearmotor with a power of 11 kW with a rotational output 24 rpm, changing the transmission system from chain-sprocket to a coupling, and increasing the diameter of the head pulley from 478 mm to 560 mm to increase the belt conveyor transport capacity to 125 tons per hour.
References
Production Division PT Semen Nusantara, Belt Conveyor. 1986.
Bridgestone Corporation, “Conveyor Belt Design Manual,” 2014.
Sularso; Kiyokatsu Suga, Dasar Perencanaan dan Pemilihan Elemen Mesin, 11th ed. Pradnya Paramita, 2004.
A. N. Rahmatika, “PENINGKATAN KAPASITAS BELT CONVEYOR X92-BC1,” 2020.
ABB, “Technical Information System.” http://bc-cc-tis-srv/km/. (accessed May 10, 2022).
Erda Cantia; Herjuno Jati; Mita Kusumaningrum, Penghematan Sumber Daya Alam Tanah Liat dan Pasir Besi dengan Pemanfaatan FABA dalam Industri Semen. Cilacap: PT Solusi Bangun Indonesia Tbk Pabrik Cilacap, 2020.
H. Sugiharto and G. H. Kusuma, “PENGGUNAAN FLY ASH DAN VISCOCRETE PADA SELF COMPACTING CONCRETE,” Dimensi Teknik Sipil, vol. 3, no. 1, pp. 30–35, 2001, [Online]. Available: http://puslit.petra.ac.id/journals/civil
S. Pradita, A. Kurniawandy, and Z. Djauhari, “PEMANFAATAN ABU DASAR (BOTTOM ASH) SEBAGAI BAHAN SUBSTITUSI PASIR PADA BETON MUTU NORMAL,” Pekanbaru. Accessed: May 11, 2022. [Online]. Available: https://repository.unri.ac.id/bitstream/handle/123456789/4596/SURYAPRADITA_0807121053.pdf?sequence=1&isAllowed=y
Suryadi Dedi, “RANCANG BANGUN PROTOTYPE BELT CONVEYOR,” 2018.
A. W. Ummami, “PERENCANAAN ULANG BELT CONVEYOR UNTUK MESIN PENGHANCUR BATU DENGAN KAPASITAS 30 TON/JAM,” Surabaya, 2018.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Nur Citra Wahyudianti, Dewin Purnama, Rochsigit Nugroho

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Jurnal ini berlisensi Atribut Berbagi Serupa 4.0 Internasional (CC BY-SA 4.0)
Anda diperbolehkan:
- Berbagi — menyalin dan menyebarluaskan kembali materi ini dalam bentuk atau format apapun;
- Adaptasi — menggubah, mengubah, dan membuat turunan dari materi ini untuk kepentingan apapun, termasuk kepentingan komersial.
Berdasarkan ketentuan berikut:
-
Atribusi — Anda harus mencantumkan nama yang sesuai, mencantumkan tautan terhadap lisensi, dan menyatakan bahwa telah ada perubahan yang dilakukan. Anda dapat melakukan hal ini dengan cara yang sesuai, namun tidak mengisyaratkan bahwa pemberi lisensi mendukung Anda atau penggunaan Anda.
-
BerbagiSerupa — Apabila Anda menggubah, mengubah, atau membuat turunan dari materi ini, Anda harus menyebarluaskan kontribusi Anda di bawah lisensi yang sama dengan materi asli.
- Tidak ada pembatasan tambahan — Anda tidak dapat menggunakan ketentuan hukum atau sarana kontrol teknologi yang secara hukum membatasi orang lain untuk melakukan hal-hal yang diizinkan lisensi ini.