MODEL PROSES PRODUKSI KEMASAN BERBASIS OFFSET PRINTING

Authors

  • Zulkarnain Politeknik Negeri Jakarta
  • Novi Purnama Sari
  • Dianta Mustofa Kamal
  • Muhammad Asrol

DOI:

https://doi.org/10.32722/pt.v22i2.4578

Abstract

The need for packaging is currently increasing, providing opportunities for the development of the packaging printing industry, especially offset printing-based printing. This study aims to analyze the flow of the production process in the offset printing industry that produces packaging. This study uses a descriptive qualitative method to analyze the running of the production process which consists of pre-print, print, and post-print. The results showed that the results of the packaging printing production process at each stage were strongly influenced by the previous stage.

Downloads

Download data is not yet available.

References

H. Kipphan, Handbook of Print Media, Technologies and Production. 2001.

S. F. E. Eriyatno, Riset kebijakan metode penelitian untuk pascasarjana. 2007.

N. M. Marimin, Aplikasi Teknik Pengambilan Keputusan dalam Manajemen Rantai Pasok (Application for Decision Making Technique in Supply Chain Management),. 2010.

E. I. Martawijaya, “Model Pengelolaan Percetakan Berkualitas dan Berwawasan LingkunganModel Pengelolaan Percetakan Berkualitas dan Berwawasan Lingkungan,” IPB Univ. Bogor, 2009.

N. Azmi, Rancangan Bangun Model Proses Penerimaan Pesanan pada Industri Kemasan Karton. 2012.

S. Hartini, “Analisa Pengaruh Waste Cetak Offset Terhadap Harga Produk Kamus Indonesia-Inggris,” Pros. Semin. Nas. Energi Teknol. (Sinergi), 149-160, 2018.

E. W. A. Azrifirwan, T. Djatna, M. S. Maarif, M. Ushada, “Model Kaidah Keputusan Untuk Mengetahui

Elemen Desain Kemasan Pembentuk Persepsi Konsumen,” J. Teknol. Ind. Pertanian, Vol 27, No.3, Hal 271–280, 2017. doi 10.24961/j.tek.ind.pert.2017.27.3.271., 2017.

I. Y. R. R. Srimurni, E. Darmawati, “Perancangan Kemasan Buah Salak Segar Dalam Bentuk Tandan (Salak Pondoh Banjarnegara, Jawa Tengah),” J. Teknol. Ind. Pertanian. Vol.28, No.2, Hal 180–190, 2018. doi 10.24961/j.tek.ind.pert.2018.28.2.180, 2018.

S. Zulkarnain, Machfud, Marimin, E. Darmawati, “Design of Graphic Concept Model for Specialty Coffee Packaging Labels,” Int. J. Technol. Vol. 14(3), pp. 606-617, 2023.

H. Viluksela, “Evaluation of a Prepress Workflow Solution for Sheetfed Offset (Thesis Bachelor Degree),” Helsinki Metrop. Univ. Finland, 2017.

D. B. Purwantoko, Alur Kerja Proses Produksi Cetak dan Kemasan di PT. Krisanthium Offset Printing (Undergraduate Thesis). 2011.

J. M. J. Cherukara, “Agglomeration Effect on The Offset Printing Industry in Sivakasi,” Max Plank-IISc 2nd Int. Conf. Bangalore, 2007.

N. A. N. F. Fatma, H. Ponda, “Usaha Pengoptimalan Efektivitas Proses produksi Percetakan Produk Pada Divisi Offset Di PT. Citra Sastra Grafika,” J. Ind. Manuf. Vol. 8, No. 1, pp. 79 – 88, 2023.

Published

2023-05-09

How to Cite

Zulkarnain, Purnama Sari, N. ., Mustofa Kamal, D., & Asrol, M. (2023). MODEL PROSES PRODUKSI KEMASAN BERBASIS OFFSET PRINTING. Jurnal Poli-Teknologi, 22(2), 56–62. https://doi.org/10.32722/pt.v22i2.4578

Issue

Section

Articles

Most read articles by the same author(s)