Implementasi Alat Pencacah Daun Bambu Kering sebagai Media Tanam dengan Arduino Uno

##plugins.themes.academic_pro.article.main##

Inna Novianty
Walidatush Sholihah

Abstract

Dried bamboo leaves were chosen as a planting media for strengthen nutrients and improve soil drainage. Before being processed into fertilizer, the dried bamboo leaves will be chopped first. The problem that exists is that the chopping of dried bamboo leaves is still manually using a knife and scissors so it is quite time consuming and less effective. Making a dry bamboo leaf chopper with Arduino uno to chop dry bamboo leaves with a limit switch sensor so that it can rotate and stop the chopper blade automatically. The process of making this tool uses a method, namely, design to design hardware, software, and casing design, manufacture, namely the implementation of the design, and testing to carry out the testing phase of the tool so that the tool runs according to its purpose. The manufacture of this tool consists of hardware components which include Arduino uno, limit switch, DC motor, BTS7960 motor driver, step down LM2596, and power supply as well as software using Arduino IDE. The result of making a dry bamboo leaf chopper with Arduino uno is that it can chop dry bamboo leaves according to the purpose. This tool can chop up to 50 grams of dry bamboo leaves. Suggestions in making this tool are development by adding automation when the container is full and the tool automatically runs as well as increasing the duration of counting on the tool.

##plugins.themes.academic_pro.article.details##

How to Cite
Novianty, I., & Sholihah, W. . (2022). Implementasi Alat Pencacah Daun Bambu Kering sebagai Media Tanam dengan Arduino Uno. MULTINETICS, 8(2), 105–114. Retrieved from https://jurnal.pnj.ac.id/index.php/multinetics/article/view/4714

References

  1. A. Dina, Aneka Jenis Media Tanah dan Penggunaanya. PT Pemberswadaya Jakarta, 1994.
  2. A. Gumelar, I. Karyaningsih, and A. Nurlaila, “Pengaruh Penggunaan Kompos Daun Bambu Terhadap Pertumbuhan Semai Sonokeling ( Dalbergia Latifolia ),” pp. 214–224, 2021.
  3. M. N. Khoironi et al., “Modifikasi Alat Pencacah Daun Kering Dengan Penambahan Saringan,” pp. 267–272, 2020.
  4. A. Sutrisna, Syawaldi, Dedikarni, and J. Raharjo, “Design of Dry Leaves Shredder Machine Using Five Blades,” J. Renew. Energy Mech., vol. 2, no. 2, pp. 66–80, 2019, doi: 10.25299/rem.2019.vol2(02).3532.
  5. B. Hafidin and Y. Setiawan, “Rancang Bangun Mesin Pencacah Daun Pelawan Menjadi Serbuk Teh,” pp. 70–74, 2012.
  6. H. Suripto, Sukarman, and Aprizal, “Pembuatan Mesin Pencacah Single Blade Kapasitas 100 kg/jam dengan Metode Pahl & Beitz,” J. Aptek, vol. 13, no. 2, pp. 83–89, 2021.
  7. S. Hariyadi and E. S. Budi, “Perencanaan Mesin Pencacah Rumput Dengan Kapasitas 800 Kg / Jam,” vol. 04, pp. 15–31, 2015.
  8. E. Ihsanto and S. Hidayat, “Rancang Bangun Sistem Pengukuran Ph Meter dengan Menggunakan Mikrokontroller Arduino Uno,” J. Teknol. Elektro, Univ. Mercu Buana, vol. 5, no. 3, pp. 130–137, 2014.
  9. C. Khairunisa, D. Triyanto, and I. Nirmala, “Implementasi Sistem Pengendalian Pemupukan dan Penyiraman Tanaman Otomatis Berbasis Arduino Mega 2560 Dengan Antarmuka Website,” J. Coding, Rekayasa Sist. Komput, vol. 06, no. 03, pp. 87–96, 2018.
  10. R. A. Priramadhi, A. S. Wibowo, F. T. Elektro, U. Telkom, and A. Uno, “Perancangan Mesin Penyortiran Dan Proses Pengemasan Benih Kentang Berdasarkan Ukuran Menggunakan Sistem Conveyor Design of Sortation and Packaging Process Machine for Potato Seeds,” vol. 6, no. 2, pp. 2886–2893, 2019.
  11. G. P. Sari and S. Sukardi, “Kendali Alat Pelontar Bola Tenis Lapangan Berbasis Mikrokontroler,” JTEIN J. Tek. Elektro Indones., vol. 1, no. 2, pp. 187–192, 2020, doi: 10.24036/jtein.v1i2.65.
  12. Y. D. Widiarto, M. E. I. Najoan, and M. D. Putro, “Sistem Penggerak Robot Beroda Vacuum Cleaner Berbasis Mini Computer Raspberry pi,” J. Tek. Elektro dan Komput., vol. 7, no. 1, pp. 25–32, 2018.
  13. P. Kresnha, S. Ambo, and Y. Sosrowiguno, “Smart Outdoor Hidroponik Dengan Pengaturan Penyinaran Matahari dan Hujan Berbasis Mikrokontroller,” J. Sains, Teknol, dan Ind, vol. 16, no. 1, 2018.
  14. I. A. Ridlo, “Pedoman Pembuatan Flowchart,” 2017.
  15. R. Muhardian and Krismadinata, “JTEV (JURNAL TEKNIK ELEKTRO DAN VOKASIONAL) Kendali Kecepatan Motor DC Dengan Kontroller PID dan Antarmuka Visual Basic,” J. Tek. Elektro dan Vokasional, vol. 06, no. 01, pp. 328–339, 2020, [Online]. Available: http://ejournal.unp.ac.id/index.php/jtev/index%0Ahttp://ejournal.unp.ac.id/index.php/jtev/article/view/108034.