ANALISIS KEKUATAN HELIDECK SANTOS SANGU PT. McDERMOTT INDONESIA

##plugins.themes.academic_pro.article.sidebar##

Published Jul 28, 2023
https://doi.org/10.32722/cmj.v5i2.5625
Download
ANALISIS KEKUATAN HELIDECK SANTOS SANGU PT. McDERMOTT INDONESIA
Statistic
Vol. 5 No. 2 (2023): Construction and Material Journal Vol. 5 No. 2 Juli 2023

##plugins.themes.academic_pro.article.main##

Anwar Anwar
Universitas Lambung Mangkurat
Hariyono Ismail
Politeknik Batu Licin

Abstract

Offshore building structures are buildings commonly used for oil and gas exploitation activities. The distance is quite far from the coastal area, it is necessary to support transportation facilities for the mobility of offshore structures such as ships and helicopters. To support this mobilization activity, a helicopter landing medium is needed, namely the helideck. This study aims to identify the shock loads that occur on the helideck and calculate the strength of the helideck santos sangu PT.McDermott Indonesia. This study used data from PT.McDermott Indonesia on one of the projects located in Block 16, Bangladesh. The helicopter data used in this study was a jet-A1 type helicopter with a maximum weight of 5307 Kg. The results showed that the value of the helicopter dynamic load on a normal landing was 10348.65 Kg with a working stress of 62163.41 N/mm2 and had an interaction ratio (IR) = 0.35, while for an emergency landing the dynamic load was 1724.75 Kg, the working stress was 103606.45 N/mm2, interaction ratio (IR)= 0.59.

##plugins.themes.academic_pro.article.details##

References

  1. Ahmadi, H., & Zavvar, E. (2015). Stress concentration factors induced by out-of-plane bending loads in ring-stiffened tubular KT-joints of jacket structures. Thin-Walled Structures, 91, 82-95.
  2. Pan, Z., Wu, G., Si, F., Shang, J., Zhou, H., Li, Q., & Zhou, T. (2022). Parametric study on SCF distribution along the weld toe of internally ring-stiffened two-planar tubular KK joints under axial loading. Ocean Engineering, 248, 110826.
  3. Tawekal, R. L., Fitriany, F., & Tukuboya, M. T. (2006). Pengembangan Formula SCF untuk Analisa Kelelahan Joint (Sambungan) T pada Struktur Bangunan Lepas Pantai. Jurnal Teknik Sipil ITB, 13(1), 33-40.
  4. Veriyanto, V., Yudo, H., & Adietya, B. A. (2016). Analisa Kekuatan Konstruksi Jacket Platform Terhadap Beban Gravitasi Dan Interferensi Lingkungan Di Perairan Madura Menggunakan Fem. Jurnal Teknik Perkapalan, 4(3).
  5. ANWAR, A., & BACHMID, R. (2020). Optimasi Struktur Helideck Dengan Variasi Beban Helikopter. Construction and Material Journal, 2(3), 155-161.
  6. Sitepu, G., & Alie, M. Z. M. (2018). Pengaruh Brace Terhadap Kekuatan Kaki Struktur Helideck Dalam Menahan Beban Pendaratan Darurat Helikopter. Jurnal Penelitian Enjiniring, 22(2), 185-192.
  7. Burt, B. J. (2002). Offshore Helideck Design Guidelines for the Health and Safety Executive
  8. Hidayatulloh, A., Mulyatno, I. P., & Adietya, B. A. (2017). Analisa Kekuatan Struktur Helideck Pada Kapal Landing Ship Tank (Lst) KRI. Teluk Bintuni 7000 DWT Dengan Menggunakan Metode Elemen Hingga. Jurnal Teknik Perkapalan, 5(1).
  9. Vaghefi, M., Bagheri, H., & Mohebpour, S. R. (2013). Nonlinear analysis of offshore helidecks due to the helicopter emergency landing loads. Middle East Journal of Scientific Research, 13(10), 1351-1358.
  10. Safety Regulation Group CAP 437 Edition 2012, Standar For Offshore Helikopter Landing, Civil Aviation Authery.
  11. API, R. (2002). 2A-WSD Recommended Practice for planning, designing and Constructing Fixed Offshore Platforms–Working Stress Design, December 2000. Errata and supplement, 1.
  12. Caesario, A., & Setyawan, D. (2019). Optimasi Konstruksi Pilar Penyangga Helideck KP Yudistira 73 Meter. Jurnal Teknik ITS, 8(2), G130-G135.